Description All-purpose high pressure motor Size 5 … 16, 200 … 1000 Nominal pressure up to 400 bar Maximum pressure up to 450 bar Open and closed circuits Features Large variety of available nominal sizes allows exact adjustment to the application High power density Very high total efficiency High starting efficiency Working ports SAE flange or thread Optional with integrated pressure relief valve Optional with mounted additional valve: counterbalance valve (BVD/BVE), flushing and boost-pressure valve Bent-axis design Type code 1) Sizes 45, 56, 63, 80, 90 see data sheet 91071 (A2FM series 70) 2) Tapered shaft with threaded pin and woodruff key (DIN 6888). The torque must be transmitted via the tapered press fit. 1) Threaded ports at the sides plugged with threaded plugs. 2) Please contact us. 3) Specify ordering code of counterbalance valve according to data sheet 95522 (BVD) respectively data sheet 95526 (BVE) separately. 4) Size 710 please contact us. 5) Specify ordering code of sensor according to data sheet 95133 (DSA) respectively data sheet 95135 (HDD) separately. Notice Please note the project planning notes in chapter Project planning notes Please note that not all type code combinations are available although the individual functions are marked as being available Technical data Table of values Size 5 10 12 16 23 28 32 45 56 63 80 90 107 125 160 180 200 250 355 500 710 1000 Displacement geometric, per revolution Vg cm³ 4.93 10.3 12 16 22.9 28.1 32 45.6 56.1 63 80.4 90 106.7 125 160.4 180 200 250 355 500 710 1000 Nominal pressure pnom bar 315 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 350 350 350 350 350 Maximum pressure pmax bar 350 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 400 400 400 400 400 Maximum speed 1) nnom rpm 10000 8000 8000 8000 6300 6300 6300 5600 5000 5000 4500 4500 4000 4000 3600 3600 2750 2700 2240 2000 1600 1800 nmax 2) rpm 11000 8800 8800 8800 6900 6900 6900 6200 5500 5500 5000 5000 4400 4400 4000 4000 3000 Inlet flow 3) at nnom qV l/min 49 82 96 128 144 177 202 255 281 315 362 405 427 500 577 648 550 675 795 1000 1136 1600 Torque 4) at pnom M Nm 24.7 66 76 102 146 179 204 290 357 401 512 573 679 796 1021 1146 1273 1393 1978 2785 3955 5570 Rotary stiffness c kNm/rad 0.63 0.92 1.25 1.59 2.56 2.93 3.12 4.18 5.61 6.25 8.73 9.14 11.2 11.9 17.4 18.2 57.3 73.1 96.1 144 270 324 Moment of inertia for rotary group JTW kg·m² 0006 004 004 004 012 012 012 024 042 042 072 072 0.0116 0.0116 0.022 0.022 0.0353 0.061 0.102 0.178 0.55 0.55 Case volume V l 0.17 0.17 0.17 0.2 0.2 0.2 0.33 0.45 0.45 0.55 0.55 0.8 0.8 1.1 1.1 2.7 2.5 3.5 4.2 8 8 Weight (approx.) m kg 2.5 5.4 5.4 5.4 9.5 9.5 9.5 13.5 18 18 23 23 32 32 45 45 66 73 110 155 325 336 1) These values are valid at: - for the optimum viscosity range from vopt = 36 to 16 mm2/s - with hydraulic fluid based on mineral oils 2) Intermittent maximum speed: overspeed for unload and overhauling processes, t 3) Restriction of input flow with counterba
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
