Description Compact high pressure motor with short installation length Size 23 … 180 Nominal pressure up to 450 bar Maximum pressure up to 500 bar Open and closed circuits Features 3 pressure ranges to fit to different customer requirements and applications Very high power density Very high total efficiency High starting efficiency Robust 40° bent-axis technology Optional with integrated flushing valve Bent-axis design Technical data Table of values Size 28 32 37 45 56 63 80 90 107 23 28 32 45 56 63 80 90 107 125 160 180 45 56 63 80 90 107 125 Version A2FMN A2FMM A2FMH Displacement geometric, per revolution Vg cm³ 28.1 32 36.8 44.2 56.6 63 81.7 90.5 108.8 22.9 28.1 32 44.9 56.6 63 79.8 90.5 106.7 125 160.4 180 44.9 56.6 63 79.8 90.5 106.7 125 Nominal pressure pnom bar 300 300 300 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 Maximum pressure pmax bar 350 350 350 350 350 350 350 350 350 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 500 Maximum speed nnom 1) rpm 4725 4725 4200 4200 3750 3750 3375 3375 3000 6300 6300 6300 5000 5000 5000 4500 4500 4000 4000 3600 3600 5000 5000 5000 4500 4500 4000 4000 nmax 2) rpm 5175 5175 4650 4650 4125 4125 3700 3700 3300 6900 6900 6900 5500 5500 5500 5000 5000 4400 4400 4000 4000 5500 5500 5500 5000 5000 4400 4400 Inlet flow at nnom qV l/min 133 151 155 186 212 236 276 305 326 144 177 202 225 283 315 359 407 427 500 577 648 225 283 315 359 407 427 500 Torque 3) at pnom M Nm 134 153 176 211 270 301 390 432 519 146 179 204 286 360 401 508 576 679 796 1021 1146 322 405 451 571 648 764 895 Rotary stiffness c kNm/rad 2.2 2.46 4.29 4.84 6.97 8.11 8.47 9.85 10.96 1.76 2.2 2.46 4.65 6.97 8.11 9.1 9.85 12.49 13.65 21.32 23.04 4.65 6.97 8.11 9.1 9.85 12.49 13.65 Moment of inertia for rotary group JTW kg·m² 01 011 012 012 034 035 037 058 061 01 01 011 033 034 035 056 058 088 091 0.0248 0.0254 033 034 035 056 058 088 091 Case volume V l 0.3 0.3 0.3 0.3 0.6 0.6 0.6 0.65 0.65 0.3 0.3 0.3 0.6 0.6 0.6 0.65 0.65 1.1 1.1 0.8 0.8 0.6 0.6 0.6 0.65 0.65 1.1 1.1 Weight (approx.) m kg 10.7 10.7 10.7 10.7 17 17 17 23 23 10.7 10.7 10.7 17 17 17 23 23 32.8 32.8 41 41 17 17 17 23 23 32.8 32.8 1) These values are valid at: - for the optimum viscosity range from vopt = 36 to 16 mm2/s - with hydraulic fluid based on mineral oils 2) Intermittent maximum speed: overspeed for unload and overhauling processes, t 3) Torque without radial force, with radial force see table "Permissible radial and axial forces of the drive shafts" Note The values in the table are theoretical values, without consideration of efficiencies and tolerances. The values are rounded. Exceeding the maximum or falling below the minimum permissible values can lead to a loss of function, a reduction in operational service life or total destruction of the axial piston unit. Other permissible limit values, such as speed variation, reduced angular acceleration as a function of the frequency and the perm
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
