Description Valid for: Hägglunds motor CA, CB, CBM Maximum flow 1000 l/min Maximum pressure 350 bar Features Compact and robust design Possibility to combine the valves and functions with each other Mounted directly on Hägglunds motors Product description A range of valve adapters are available as accessories to the range of Hägglunds valves and motors. All adapters are designed for a pressure level of 350 bar and a minimal pressure drop. Some adapters can be used with tandem mounted motors or where 4 ports are required for the flow. Some adapters is also necessary to provide clearance to some valve- and motor configurations. Selection of an adapter for a given valve and motor combination, or a combination of two valves, is shown in chapter "Project planning instruction". The tables are based on standard adapter including 4-port connection. If 4-port connecion is not needed a minimized adapter block height is available. The adapters are all delivered with the necessary bolts, washers and o-rings to install the valve or the combination of valves indicated. Type code ln order to identify Hägglunds equipment exactly, the following ordering code is used. These ordering codes should be stated in full in all correspondence e.g. when ordering spare parts. 01 02 03 VA 1000 01 Valve adapter VA Maximum flow 02 1000 l/min 1000 Version (See chapter "Project planning information" - table "Chart for CA motors", table "Chart for CB and CBM motors" and table "Stacked valves") 03 Two speed motors CA and valve VTCA 600 for port A1, C1 1 Two speed motors CA and valve VTCA 600 for port A2, C2 2 Minimize total height for valve adapter combination (CA, CB) 3 Minimize total height for valve adapter combination with BICA, MDA and tandem (CA) 6 Included in valve VCBCA 1000, V4WCA 1000 and VFCCA 1000 10 For valve VCBCA 480 in combination with MDA (CA) 11 For valve COCB 1000 in combination with tandem and 4-port connection (CA) 12 For valve VFWCB 600 in combination with tandem CA 100, 140, 210 and MDA 13 For valve CTCA 1000 in combination with CB and for 4-port connection CA 14 For CBM motor (From SAE 2" to SAE 11/4") 15 Technical data General data Type Mechanical specification Weights Surface treatment Maximum operating pressure Maximum flow bar l/min kg VA 1000 1 350 1000 9 Zinc plated and passivated (Cr3) VA 1000 2 VA 1000 3 8 Black-oxide DIN 50938 VA 1000 6 12 VA 1000 10 24 VA 1000 11 27 VA 1000 12 VA 1000 13 VA 1000 14 VA 1000 15 30 Zinc plated and passivated (Cr3) Hägglunds VA 1000 1 and VA 1000 2 Valve adapter VA 1000 1 Material VA 1000 1 and VA 1000 2 Position Material ID Description Quantity 1 R939002291 R939002292 Adapter VA 1000 1 (pos 2-5 included) Adapter VA 1000 2 (pos 2-5 included) 1 2 Socket head cap screw 1/2 UNC x 178 Tightening torque 131 Nm 4 3 O-RING 64X2.62 FPM 70 2 4 O-RING 23.47X2.62 FPM 70 1 5 O-RING 59X2.62 FPM 70 1 Hydraulic diagram VA 1000 1 1) Motor interface Hydraulic diagram VA 1000 2 1) Motor interface VA 1000 1 Dimensions in mm VA 1000 2 Di
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
