Description Size 6 … 30 Component series 1X Maximum operating pressure 450 bar Maximum flow 450 l/min Features For threaded connection (screw-in thread) Leakage-free blocking in one direction Various cracking pressures, optional Type code 01 02 03 04 05 06 07 08 09 S A - 1X / Type 01 Isolator valve S Size 02 Size 6 6 Size 8 8 Size 10 10 Size 15 15 Size 20 20 Size 25 25 Size 30 30 Connection 03 Threaded connection A Cracking pressure (see characteristic curves) 04 0 bar (without spring) 00 0,2 bar 02 0.5 bar (standard) 05 1.5 bar 15 3,0 bar 30 5 bar 50 8 bar (only NG25 and 30) 80 Component series 05 Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions) 1X Maximum operating pressure 06 Maximum operating pressure 420 bar (Nominal size 25 and 30) 420 Maximum operating pressure 450 bar (Nominal size 6 ... 20) 450 Corrosion resistance 07 Improved corrosion protection (240 h salt spray test according to EN ISO 9227) J3 High corrosion protection (720 h salt spray test according to EN ISO 9227) J5 Piston bore (orifice in channel B) 08 Without piston bore no code Thread M4; not fitted B00 Orifice Ø1.0 mm B10 Orifice Ø1.2 mm B12 Orifice Ø1.5 mm B15 Connection thread 1) 09 Pipe thread "G" according to ISO 228-1 no code Pipe thread "M" according to ISO 261 /2 Pipe thread “UNF/UN” according to ANSI/ASME B 1.1 /12 1) Other versions available on request Technical data general Size 6 8 10 15 20 25 30 Weight kg 0.1 0.2 0.3 0.5 1 2 2.5 MTTFD values according to EN ISO 13849 Years 150 1) 1) Not for version "00"; Certificate "Assumed exclusion of faults according to EN ISO 13849-2:2012-10 tab. C4" available upon request. For further details, see data sheet 08012 hydraulic Size 6 8 10 15 20 25 30 Maximum operating pressure 1) bar 450 420 Cracking pressure See characteristic curves Maximum flow See characteristic curves Hydraulic fluid see table Hydraulic fluid temperature range °C -30 … +80 Viscosity range mm²/s 2.8 … 500 Maximum admissible degree of contamination of the hydraulic fluid 2) Class 20/18/15 according to ISO 4406 (c) 1) Maximum operating pressures up to 1000 bar upon request. 2) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. Hydraulic fluid Classification Standards Data sheet Mineral oils HL,HLP, HLPD, HVLP, HVLPD DIN 51524 90220 Bio-degradable 1) Insoluble in water HETG ISO 15380 90221 HEES Soluble in water HEPG ISO 15380 Flame-resistant Water-free HFDU (glycol base) HFDU (ester base) 1) ISO 12922 90222 Containing water 1) HFC (Fuchs Hydrotherm 46M, Petrofer Ultra Safe 620) ISO 12922 90223 Important information on hydraulic fluids: For further information and data on the use of other hydraulic fluids, please refer to the data sheets above or contact us. There may be limitations regarding the technical valve
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
