Description Size 10 Component series 5X Maximum operating pressure 315 bar Maximum flow 180 l/min Area of application in accordance with the Explosion Protection Directive 2014/34/EU: II 3G Type of protection: Ex ic IIC T4 Gc according to EN IEC 60079-0 / EN 60079-11 and IEC 60079-0 / IEC 60079-11 Features 4 or 3-way version For intended use in potentially explosive atmosphere Valve to control position, force, pressure or velocity For subplate mounting Porting pattern according to ISO 4401-05-05-0-05 Dry control motor, no contamination of the solenoid gaps by the hydraulic fluid Wear-free control spool return element Pressure chambers at the control sleeve with gap seal, therefore no wear of the seal ring Product description Valves of type 4WS2EM ...XL are electrically operated, 2-stage directional servo valves. They are mainly used to control position, force, pressure or velocity. The valves consist of an electro-mechanical converter (torque motor) (1), a hydraulic amplifier (nozzle flapper plate system) (2) and a control spool (3) in a sleeve (2nd stage), which is connected to the torque motor via a mechanical feedback. An electrical input signal at the coils (4) of the torque motor generates a force by means of a permanent magnet which acts on the armature (5), and in connection with a torque tube (6) results in a torque. This causes the flapper plate (7) which is connected to the torque tube (6) via a bolt to move from the central position between the two control nozzles (8), and a pressure differential is created across the front sides of the control spool (3). The pressure differential results in the control spool changing its position, which results in the pressure port being connected to one actuator port and, at the same time, the other actuator port being connected to the return flow port. The control spool (3) is connected to the flapper plate or the torque motor by means of a bending spring (mechanical feedback) (9). The position of the control spool (3) is changed until the feedback torque across the bending spring and the electro-magnetic torque of the torque motor are balanced and the pressure differential at the nozzle flapper plate system becomes zero. The stroke of the control spool (3) and consequently the flow of the servo valve are controlled proportionally to the electrical input signal. It must be noted that the flow depends on the valve pressure drop. External control electronics (separate order) External control electronics (servo amplifier) serve the actuation of the valve, amplifying an analog input signal (command value) so that with the output signal, the servo valve is actuated in a flow-controlled form. For the limitation of the electric data, a safety barrier is to be connected between valve and amplifier (see "Electrical connection"). Typ 4WS2EM 10…XL Type code 01 02 03 04 05 06 07 08 09 10 11 12 13 14 4 WS2EM 10 - 5X / B 11 XL K31 V 01 4 main ports 4 02 Servo directional valve, 2-stage, with mechanical feedback,
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
