Description Size 6 Component series 1X Max. operating pressure 315 bar Flow, max. 40 l/min Features Pilot-operated valves with position feedback and integrated electronics for system pressure reduction at the actuator (internal pilot oil supply only) 3-way version Adjustable via the position of the solenoid armature in relation to the compression spring Position-controlled, minimum hysteresis Maximum pressure limitation, even with defective electronics For subplate mounting: Porting pattern according to ISO 4401 Product description Proportional pressure reducing valves of type DREBE6X are pilot-operated; the main stage is a 3-way version. The pilot control valve (DBV pilot valve) has a flow-controlled internal pilot oil supply via P. It is actuated by a position-controlled proportional solenoid with integrated electronics. Dependent on the command value, the pressure in A (actuator) can be steplessly set and reduced using these valves. Type code 01 02 03 04 05 06 07 08 09 10 11 12 DREB E 6 X – 1X / M G24 K31 M * 01 Proportional pressure reducing valve in 3-way version with inductive position transducer, pilot-operated DREB 02 With integrated electronics (OBE) E 03 Size 6 04 Porting pattern according to ISO 4401-03-02-0-05 X 05 Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions) 1X Maximum pressure rating 06 Up to 75 bar 75 Up to 175 bar 175 Up to 310 bar 310 07 Without check valve M Supply voltage of the control electronics 08 Direct voltage 24 V G24 Electrical connection 09 Connector according to DIN 43563-AM6 Mating connector separate order K31 Electrical interface 10 Command value 0 … 10 V A1 Command value 4 to 20 mA F1 11 NBR seals, suitable for mineral oil HL and HLP according to DIN 51524 M 12 Further details in the plain text * Technical data general Type DREBE6X Size 6 Component series 1X Installation position any Weight kg 3.3 Ambient temperature range °C -20 … +50 hydraulic Type DREBE6X Size 6 Maximum operating pressure bar 315 Maximum operating pressure Port P bar 315 Port T bar 250 Pilot flow l/min ≈ 0.6 Maximum flow l/min 40 Hydraulic fluid temperature range °C -20 … +70 Viscosity range mm²/s 10 … 800 Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 1) Class 18/16/13 according to ISO 4406 (c) Hysteresis 2) % ≤ 1 Manufacturing tolerance of the command value pressure characteristic curve 2) % 1) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. 2) Of the maximum set pressure electrical Type DREBE6X Power supply Nominal voltage V 24 Lower limit value V 21 Upper limit value V 40 Duty cycle % 100 Protection class according to DIN EN 60529 IP65 Conformity CE conformity according to EMC directive 2004/108/EC tested according to EN 61000
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
