Подшипниковый узел LAN BASA

Description The fixed bearing consists of: Angular-contact thrust ball bearing LGN Slotted nut NMA or NMZ Suitable for screw ends in Forms 51, 51A, 81, 81A, 82, 82A, 91, 91A, 92, 92A, 831, 931 Product description Fixed bearing with angular-contact thrust ball bearing LGN Double-thrust, series LGN-B-… series LGN-A-… Double-thrust, in pairs, series LGN-C-… Technical data Technical data for bearings Size C C0 MRb Rfb Rkl nmax Mass d0 x P N N Nm N/μm Nm/mrad rpm kg 6 x 1/2 8 x 1/2/2,5/5 12 x 2/5/10 6900 1) 8500 1) 0.04 200 8 6800 0.04 16 x 5/10/16 13400 1) 18800 1) 0.12 325 25 4600 0.11 20 x 5/10/20/40 17000 1) 24700 1) 0.16 375 50 3800 0.215 25 x 5/10/25 18800 1) 31000 1) 0.24 450 80 3300 0.248 2) 0.29 3) 32 x 5/10/20/32/64 26000 1) 47000 1) 0.3 650 140 3000 0.345 4) 0.44 5) 40 x 5 29000 1) 64000 1) 0.5 850 300 2200 0.465 6) 0.59 7) 40 x 10/12/16/20/25/30/40 44500 1) 111000 1) 0.6 1300 450 2600 0.84 50 x 5 41000 1) 89000 1) 900 400 2000 0.74 50 x 10/12/16/20/25/30/40 47500 127000 0.75 1500 620 2200 0.98 63 x 10/20/40 72000 1) 149000 1) 1.3 1200 750 1600 1.25 80 x 10/20/40 113000 1) 250000 1) 2.6 1400 1500 1200 2.93 1) Load on bearing (see general technical notes and information for bearings, “Project planning notes”) 2) R159011700 3) R159011730 4) R159012000 5) R159012030 6) R159013000 7) R159013030 Legend Symbol Description Unit d0 Nominal diameter P Lead C Dynamic load capacity N C0 Static load capacity N MRb Frictional torque of bearing with seal Nm Rfb Rigidity of the bearing (axial) N/μm Rkl Rigidity against tilting Nm/mrad nmax Limit speed (grease) min⁻¹ Fields of application Suitable for screw ends: Form 51 51A 81 81A 91 91A 8311)2) 52 52A 82 82A 92 92A 9311) 1) For screws 8 x 2.5 2) For screws 6 x 1; 6 x 2; 8 x 1; 8 x 2 Dimensions 1) LGN-B-…with slotted nut NMA, LGN-A-…with slotted nut NMA 2) LGN-C-…with slotted nut NMA 3) LGN-B-…with slotted nut NMZ Dimensions Size Dimensions Connection dimensions d0 x P d D B Da min. Da max. da min. da max. mm mm mm mm 6 x 1/2 8 x 1/2/2,5/5 12 x 2/5/10 6 mm -0.01 24 mm -0.01 15 mm -0.25 16 19 9 15 16 x 5/10/16 10 mm -0.01 34 mm -0.01 20 mm -0.25 25 28 14 24 20 x 5/10/20/40 12 mm -0.01 42 mm -0.01 25 mm -0.25 30 33 16 29 25 x 5/10/25 17 mm -0.01 47 mm -0.01 34 37 23 33 32 x 5/10/20/32/64 20 mm -0.01 52 mm -0.01 28 mm -0.25 40 43 25 39 40 x 5 30 mm -0.01 62 mm -0.01 50 53 40 49 40 x 10/12/16/20/25/30/40 25 mm -05 57 mm -0.01 56 mm -0.05 45 48 32 44 50 x 5 35 mm -0.01 72 mm -0.011 34 mm -0.25 59 62 45 58 50 x 10/12/16/20/25/30/40 30 mm -05 62 mm -0.01 56 mm -0.5 50 53 40 49 63 x 10/20/40 40 mm -05 90 mm -0.01 46 mm -0.25 71 80 56 70 80 x 10/20/40 50 mm -05 110 mm -0.01 54 mm -0.25 88 100 63 87 Legend Symbol Description d0 Nominal diameter P Lead Project planning information Separate technical size selection to determine limit values is is essential for all additional components (e.g. pillow block units, assembly group Bearing Unit etc.). Calculation Mounting Design notes, installation Maintenance Lubrication