Передние смазочные узлы R1619 .2. 00

Description For travel up to 25,000 km without relubrication Ball Runner Block only needs initial lubrication with grease Front lube units on both sides of the Ball Runner Block Low lubricant loss Reduced oil consumption Features No lubrication lines Front lube unit can be refilled using the lube nipple on the end-face or at the side. Lube port on the end-face of the front lube unit is suitable for lubricating the ball runner block with grease. Product description Possible travel distance with front lube units Previous travel distance s A With oil lubrication to 500 km B With grease lubrication to 1000 km Possible travel distance s C With front lube units to 10,000 km Size 15 20 25 30 35 45 55 65 possible travel distance s with front lube units km 15000 25000 1500 1000 Lubricant distribution Due to the special lubricant distribution construction, lubrication primarily takes place where it is needed: directly on the running tracks and the top surface of the Ball Guide Rail. 1 Top surface of the ball guide rail 2 Running tracks of the ball bearing guide 3 Oil tank 4 Seals Front lube unit R1619 2. 00 Material: special plastic The front lube units R1619 .2. 00 are already filled with oil (Mobil SHC 639) and can be mounted after basic lubrication of the Ball Runner Block. Front lube unit R1619 2. 10 Material: special plastic The front lube units R1619 2. 10 are left empty at the factory. Technical data General technical data Size Part number Oil maximum operating temperature Mass cm³ °C g 15 R161912500 1 + 60 15 20 R161982500 2.2 20 R161982600 1) 1.8 25 R161922500 2.6 25 R161922600 1) 2.5 30 R161972500 3.85 35 35 R161932500 5.7 50 45 R161942500 9.6 70 55 R161952500 14.5 90 65 R161962500 30 130 1) For Ball Runner Blocks F.N (flanged ... low profile) and S.N (slimline ... low profile) Dimensions a) Size 65 Dimensions Size 15 20 25 30 35 45 55 65 Part number R161912500 R161982500 R161982600 1) R161922500 R161922600 1) R161972500 R161932500 R161942500 R161952500 R161962500 A4 mm 31.8 43 41 47 58.8 69 84 99 124.2 B3 mm 11.5 12.5 13 14.5 16 17 18 19 E8 mm 24.55 32.5 30.5 38.3 48.4 58 69.8 80 76 E8.1 mm - 100 E9 mm 6.7 2) 7.3 2) 5.6 2) 11.5 2) 8.5 2) 14.6 2) 17.35 2) 20.9 2) 22.3 2) 11 2) E9 mm 10.7 2) 3) - 15.5 2) 3) - 17.6 2) 3) 24.35 2) 3) 30.9 2) 3) 32.3 2) 3) - E9.1 mm - 53.5 2) H mm 24 30 28 36 33 42 48 60 70 90 H 3) mm 28 - 40 - 45 55 70 80 - H3 2) mm 19.4 24.9 22.9 29.3 26.3 35.05 39.85 49.8 57.05 75.7 H3 2) 3) mm 23.4 - 33.3 - 38.05 46.85 59.8 67.05 - K2 mm 5 - 5 6 7 8 K3 2) mm 3.35 3.7 3.1 5.5 4.1 6.05 6.9 8.2 8.9 16 K3 2) 3) mm 7.35 - 9.5 - 9.05 13.9 18.2 18.9 - K4 2) mm 3.35 3.7 3.1 5.5 4.1 6.05 6.9 8.2 8.9 16 K4 2) 3) mm 7.35 - 9.5 - 9.05 13.9 18.2 18.9 - S12 M3 - M6 M3 M6 M8 S13 M3 M6 M3 M6 M8 1) For Ball Runner Blocks F.N (flanged ... low profile) and S.N (slimline ... low profile) 2) Based on the mounting face of the ball runner block 3) For ball runner blocks S.H (slimline ... high) Mounting Prior to assembling the front lube units, initial