Description HIPERFACE® Synchronous Serial Interface SSI Siemens DRIVE-CLiQ FANUC Technical data HIPERFACE® (optional: HF) HIPERFACE® is a registered trademark of SICK STEGMANN GmbH. HIPERFACE® stands for high performance interface and is a hybrid interface. It is composed of the analog process data channel on which the sinusoidal and cosine signals (analog option I1) are transferred differentially and almost instantly, as well as the bidirectional parameter channel for transmitting the absolute position and other different parameters. Furthermore, an electronic nameplate for identification and for storing drive-relevant information in the motor feedback is available. IMS-A with HIPERFACE® interface is the optimum solution for REXROTH drive systems. Option HF Power supply 7 V to ... 28 V (at connector) Current consumption 7 V, 250 mA Max. measuring speed m/s 5 Resolution of the digital interface (µm) µm 1.25 SSI – Synchronous Serial Interface (options: S1, S2, S3, S4) With the synchronous serial interface (SSI), the absolute position information is transferred to higher-level evaluation electronics via serial data transmission. Parallel to the serial data transmission, the incremental sinusoidal and cosine signals (analog option I1) are also available for enhancing the control performance. For the different requirements of the evaluation electronics in terms of the position resolution, the following SSI configurations can be chosen: Option S1 S2 S3 S4 Kodierung Binary Gray Bitanzahl (Positionen) 22 25 27 28 Parität straight none Fehlerbit Yes no Warnbit Yes no Auflösung der digitalen Schnittstelle µm 10 1 0.25 0.125 Max. clock frequency MHz 2 Power supply 4.75 V to ... 28 V (at connector) Current consumption 5 V, 300 mA Max. measuring speed m/s 5 DRIVE-CLiQ (Option: DQ) DRIVE-CLiQ is a protected trademark of Siemens. This system interface is used for connecting measuring systems to the drive components from Siemens. IMS-A with DRIVE-CLiQ interface enables easier start-up, as the interface has an electronic nameplate. This contains IMS-A-specific data, which enables error-free configuration of the drive system during start-up. Option DQ Power supply 13,2 V to ... 30,8 V (at connector) Current consumption 110 mA maximum Max. measuring speed m/s 5 Resolution of the digital interface (µm) µm 0.025 FANUC (Option: FN) IMS-A with serial FANUC interface αi offers robust, reliable, and purely serial communication for high performance tooling machines with FANUC control units. Option FN Power supply 4,6 V to ... 12,6 V (at connector) Current consumption 350 mA maximal Max. measuring speed m/s 5 Resolution of the digital interface (µm) µm 0.025 Downloads Integrated Measuring System IMS for Ball and Roller Rail systems / Instructions for electrical interfaces / only PDF Manual | R320103166_EN | 2017-10-01 | English | PDF | 2.4MB Product Groups: Integrated measuring systems Integrated Measuring System IMS for Ball and Roller Rail Systems Manual | R320103262_EN
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
