Description Product description Design 1) With fixed and floating bearing 2) With fixed bearing only 1 Rexroth Ball Screw Assembly 2 Pillow block fixed bearing end (drive side) 3 Housing with nut 4 Pillow block floating bearing end Nuts ZEM-E FEM-E-S / FEP-E-S FEM-E-C can be combined with1) Nut housing MGA MGS MGD 1) The combination options according to the document "Configuration and ordering" in the section "Ordering information" are valid. Motor attachment 1) Mount and coupling 2) Timing belt side drive Attachments: 1 Mount and coupling 2 Timing belt side drive 3 Motor Construction of mount and coupling For all Drive Units, a motor can be mounted via the mount and coupling. The mount secures the motor to the Drive Unit and serves as a closed housing for the coupling. The coupling transmits the motor drive torque to the Drive Unit's drive shaft without distortive stresses. Our standard couplings compensate for the system's thermal expansion. 1 Motor 2 Mount 3 Coupling Construction of timing belt side drive The motors of all Drive Units can be attached using a timing belt side drive. This makes the overall length shorter than when attaching the motor with a mount and coupling. The space-saving, closed pulley housing serves as protection for the belt and as a motor bracket. In addition, various gear ratios are also available (depending on size): i = 1 i = 2 The timing belt side drive can be mounted in four different directions: bottom, top (RV01 and RV02) left, right (RV03 and RV04) 1 Pulley housing made of anodized aluminum frame 2 Timing belt 3 Motor 4 Timing belt pretensioned: Apply preload force Fpr to the motor (Fpr will be indicated on delivery) 5 Cover 6 Attaching the belt pulleys with tensioning units 7 Cover plate for timing belt side drive Technical data Note: Observe the document "Calculation" in the section "Project planning notes". Load capacities and moments Size AOK-032 d0 x P mm 32 x 5 32 x 10 32 x 20 32 x 32 Nuts ZEM-E 1) FEM-E-S FEM-E-C ZEM-E 1) FEM-E-S FEM-E-C ZEM-E 1) FEM-E-S FEM-E-C ZEM-E 1) FEM-E-S FEM-E-C Nut housing MGA MGS MGD MGA MGS MGD MGA MGS MGD MGA MGS MGD C Nuts N 23310 34200 21240 14580 21240 21060 14490 21060 Fixed-bearing N 26000 1) Nut version ZEM-E only available with housing MGA General technical data Size AOK-032 d0 x P mm 32 x 5 32 x 10 32 x 20 32 x 32 Nuts ZEM-E 1) FEM-E-S FEM-E-C ZEM-E 1) FEM-E-S FEM-E-C ZEM-E 1) FEM-E-S FEM-E-C ZEM-E 1) FEM-E-S FEM-E-C Nut housing MGA MGS MGD MGA MGS MGD MGA MGS MGD MGA MGS MGD Lc Nuts mm - 48 - 77 - 64 84 - 88 120 Nuts and Nut Housings mm 150 63 83 150 77 83 150 75 84 150 114 120 Lmax Fixed/floating bearing mm 4000 Fixed bearing only mm 1500 Lad Fixed/floating bearing mm 128 Fixed bearing only mm 74 smin 2) mm 150 mca Nuts kg - 0.54 0.62 - 0.72 0.84 - 1.02 0.9 - 1.4 1.21 Nuts and Nut Housings kg 3.33 2.29 2.89 3.27 2.47 3.11 3.36 3.39 3.17 3.39 3.77 3.48 kg fix Fixed/floating bearing Aluminum kg 4.14 Steel kg 9.65 Fixed bearing only Aluminum kg 2.48 Steel kg 4.91 kg var
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
