Description With smooth base for mounting surfaces made of mineral cast parts High torque capacity Top rigidity in all load directions Area of application: For very harsh environments With smooth base for mounting surfaces made of mineral cast parts For mounting from above With cover strip made of corrosion-resistant spring steel as per DIN EN 10088 Aluminum strip clamps (without threaded holes on end faces) Features Robust strip clamp Top rigidity in all load directions High torque capacity A single cover for all holes. No end-face hole required for strip clamp. Product description Ball rails can be cut to the length required by the customer. The maximum lengths for one-piece guide rails can be found in the "Technical data" chapter. If longer rails are required, Bosch Rexroth supplies them as composite ball guide rails. Proven cover strip for the Ball Guide Rail mounting holes ▶ One cover for all bore holes saves time and costs ▶ Made of corrosion-resistant spring steel as per DIN EN 10088 ▶ Easy and safe during mounting ▶ Clip on and secure Ball guide rail with temperature control Product description of Ball Rail Systems Selection of a linear guide acc. to DIN 637 Technical data General technical data Size 25 30 35 45 m kg/m 3.2 5 6.8 10.5 Lmax mm 5813 5836 5771 Material CS Operating conditions Size 25 30 35 45 Permissible ambient temperature (min ... max) 1) 0 °C ... +80 °C 1) Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. Legend Symbol Description Unit Lmax Maximum length mm m Mass per meter kg/m Accuracy classes Dimensions Dimensions Size 25 30 35 45 A2 mm 23 28 34 45 F4 With cover strip mm 8.2 8.7 11.7 12.5 F5 mm 13 16 18 F6 mm 2 2.2 D mm 11 15 20 Dimension H2 with cover strip mm 24.45 1) 28.55 1) 32.15 2) 40.15 2) N6 15.2 mm ±0.5 17 mm ±0.5 20.5 mm ±0.5 23.5 mm ±0.5 ØS5 mm 7 9 14 T mm 60 80 105 T1 min mm 13 16 18 T1 s mm 28 3) 38 3) 50.5 3) T1 max mm 50 68 89 nB 64 48 36 1) with cover strip 0.2 mm 2) with cover strip 0.3 mm 3) Preferred dimension T1S Recommended with tolerances ± 0.75. Legend Symbol Description Unit T1 min Minimum distance mm T1 max Maximum distance mm T1 s Preferred dimension mm T Spacing of guide rail mm nB Maximum number of holes Mounting Notes ▶ Secure cover strip! ▶ Strip clamps included in scope of delivery. ▶ Observe the notes for mounting! ▶ Please request the "Mounting instructions for roller rail systems" and "Mounting instructions for cover strip". ▶ Composite Ball Guide Rail also available. General mounting instructions Accessories Standard loose cover strip with snap fit Standard loose cover strip with snap fit The cover strip is easy to clip on and remove, thereby considerably simplifying and speeding up assembly. No need to plug every single hole. No time delay while waiting for adhesive to harden when using adhesive tape. Can be mounted and removed several times (up to four times). For initial installation, storage and replacement Not product-specific
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
