Description Area of application: For restricted space in transverse direction Ball Runner Block body or ball Guide Rail made of steel with corrosion-resistant coating, matt silver finish, hard chrome plated Significantly reduced frictional oscillations and low friction level, particularly under external load Long-term lubrication is possible over several years Patented entry zone increases the travel accuracy up to a factor of six Features Attachments on the Ball Runner Block can be mounted from above Ball Runner Block pre-lubricated at the factory. Can be used on all SNS/SNO Ball Guide Rails Excellent dynamic characteristics End-face fastening thread for all attachments Different preload classes The same high load ratings in all four main directions of loading Ball Runner Block pre-lubricated at the factory. Ball chain for low noise level and best travel behavior Product description Product description of Ball Rail Systems Production description – Ball Runner Block Materials Selection of a linear guide acc. to DIN 637 Ball chain and seals Design and version Friction Due to the Rexroth design with four rows of balls, 2-point contact is available in all loading directions. This reduces the friction to a minimum. Other ball rail systems with two or four rows of balls with 4-point contact have multiple friction: due to the differential slip with lateral loading and in case of comparable prestressing without the load, the gothic raceway profile causes higher friction (depending on the raceway curvature and the load, up to five times the friction coefficient). This high friction leads correspondingly to greater heat. Seals Seals are use to prevent dirt, chips and coolants, etc. from working their way into the inside of he Ball Runner Block, thereby preventing reductions to its service life. For further information, see "Selection criteria/seals". Standard seal (SS) Universal seals are fitted as standard in Rexroth Ball Runner Blocks. They have a uniform sealing effect for Ball Guide Rails with and without cover strips. Low friction and a good sealing effect have both been taken into account in the design. For applications where effective sealing is required. Low-friction seal (LS) For special requirements with regard to ease of movement. Double-lip seal (DS) For increased exposure to media Front seal For applications in environments with fine dirt or metal particles, as well as coolants or cutting fluids. Interchangeable during servicing. Front seals are available as accessories for mounting by the customer. FKM seal For applications in extreme environments with fine dirt or metal particles, as well as heavy use of coolants or cutting fluids. Interchangeable during servicing. FKM front seals are available as accessories for mounting by the customer. Cover plate wiper For use in environments with coarse dirt or chips. Cover plate wiper are available as accessories for mounting by the customer. Technical data Load capacities and load moments Size 45 C N
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
