Description High load capacity in all load directions, including moments about all axes, due to the use of largest possible ball sizes. Size 15 and up with a lube nipples on the end face and relubrication port on the side Low friction All steel parts of the runner block are made of corrosion-resistant, martensitic steel. The runner blocks are delivered on a mounting aid. Features Accuracy classes P, H and N Relubrication hole available Smooth, quiet running thanks to optimally designed ball return and guidance Ball retention for easy replacement Product description 1) Sizes 9/M3, 12 2) Size 15 Technical data Load capacities and load moments Size 9/M3 12 15 C 1) N 1920 3200 5285 C0 1) N 3330 5340 8610 Mt 2) Nm 15.9 37.9 107 Mt0 2) Nm 27.6 63.2 174 ML 2) Nm 7.4 14.3 30 ML0 2) Nm 12.9 23.9 49 1) Calculated values as per DIN 636, Part 2 2) Calculated values (derived from C, C0) General technical data Size 9/M3 12 15 amax 1) m/s² 250 vmax 2) m/s 3 m g 26 51 110 Material NR II Operating conditions Size 9/M3 12 15 Permissible ambient temperature (min ... max) 3) -10 °C ... +80 °C 1) Only with pre-tensioned systems. For non-pre-tensioned systems: amax = 50 m/s2 2) Speeds of up to 5 m/s are possible. Service life is limited by increased wear to plastic parts. 3) Brief peaks up to 100°C are permissible. Note on dynamic load capacities and moments (see the table) Determination of the dynamic load ratings and moments is based on a total travel of 100,000 m. Often only 50,000 m are actually stipulated. For comparison: Multiply values C , M t and M L from the table by 1.26. Observe friction of the different seals. See document “Technical data”. Technical data Accuracy classes Legend Symbol Description Unit amax Maximum acceleration travel m/s2 C Dynamic load capacity N C0 Static load capacity N m Mass g ML Dynamic longitudinal moment load capacity Nm ML0 Static longitudinal moment load capacity Nm Mt Dynamic torsional moment load capacity Nm Mt0 Static torsional moment laod capacity Nm vmax Maximum permissible speed m/s Diagrams/characteristic curves Rigidity of the miniature ball rail systems at pretension Mounted runner block with 4 screws, strength class 12.9 1) δel. = elastic deflection μm 2) F = load N lift-off load Down load Dimensions 1) Funnel-type lube nipple 2) 4 lubrication holes 3) Size 15 4) Sizes 9/M3, 12 Dimensions Size 9/M3 12 15 A mm 30 40 60 A2 mm 18 24 42 A3 mm 6 8 9 B mm 39 44.5 55.5 B1 mm 31.3 34.5 45 B2 mm - 58.5 E1 mm 21 28 45 E2 mm 12 15 20 H mm 12 14 16 H1 Without longitudinal seal mm 9 10 12 H1 With longitudinal seal mm 9.65 10.65 12.65 K mm - 4 N3 mm 3.2 4 4.5 N5 mm - 2.1 S2 mm M3 M4 V1 mm 2.8 3.3 4.7 Project planning information General technical data and calculation Mounting load error Maintenance load error Delivery notes load error Downloads Profiled rail systems Manual | R320103885_EN | 2016-09-01 | English | PDF | 11.5MB Product Groups: Linear guides Miniature Ball Rail Systems Catalog | R999001207 | 2021-08-01 | English | PDF
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
