Description Very high axial holding forces Dynamic and static stabilization in the axial direction Heavy-duty brake Compact design, compatible with DIN 645 Clamps and brakes with pressure Features Can be used on all SNS roller guide rails Up to 1 million clamping cycles Up to 2,000 emergency braking operations Threaded on both sides for the hydraulic connection Solid, rigid steel housing, chemically nickel-plated High positioning accuracy Release pressure 150 bar Integrated all-around sealing Special pressure diaphragm technology for maximum functional reliability without pressure losses or leakage Brake shoes with integrated positive-locking, large-surface contact profiles for maximum axial rigidity Super heavy-duty model Low displacement 10 million clamping cycles (B10d value) Product description Functional principle Hydraulic pressure: 50 - 150 bar Clamps and brakes with pressure The large-scale clamping profiles are pressed directly through the hydraulic oil via a piston principle to the flanks of the Roller Guide Rail. Hydraulic pressure: 0 bar Decompression with spring force A pre-tensioned return spring allows for short decompression cycles. Technical data General technical data Size 45 55 65 Holding force 1) 2) N 9900 13700 22700 Displacement 3) cm³ 1.8 2.4 3.8 Max. hydraulic operating pressure bar 150 Mass kg 5.2 8.4 17.3 Operating conditions Size 45 55 65 Permissible ambient temperature (min ... max) 0 °C ... +70 °C 1) The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). 2) At 150 bar 3) Per clamping Fields of application Clamping during assembly work and standstill of the machine with energy at KBH of heavy handling systems clamping of machine tables from heavily machined machining centers Braking support as brake for linear motors of heavy handling systems Dimensions a) Hydraulic connection*) G1 on two sides b) In addition, both middle mounting holes must be used! *) Only one connection needed. All connections sealed upon delivery. Dimensions Size 45 55 65 A mm 120 140 170 B1 mm 155 184 227 B3 mm 174 204 245 E1 mm 100 116 142 E2 mm 80 95 110 E3 mm 60 70 82 F mm 15 16 20 G1 3 Verstellelemente 1/8" 1/4" H mm 60 70 90 H1 mm 51 58 76 N1 1) mm 15 18 23 N2 2) mm 13.5 13.7 21.5 S1 mm 10.5 12.5 14.5 S2 M12 M14 M16 1) For mounting from below with ISO 4762 2) For mounting from below with DIN 7984 Project planning information Additional information Hydraulic connections The hydraulic clamping elements are pre-filled with HLP 46 at the factory. The hydraulic connection is attached on two sides. One connection is suitable for the application. Take care when venting the fixed and flexible hydraulic lines, because air connections can damage the sealing elements. Connection structure, mounting the clamping elements To prevent detrimental effects, e.g. permanent grinding on the linear guide, the connection structure must be rigidly designed according to its load and requirements. If there is tilt of the clamping elements, th
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
