Корпус гайки MGD

Description Steel nut housings MGD are designed for FEM-E-B, FDM-E-C, SEM-E-B and FED-E-B nuts Dimensions Technical data and dimensions Size Mass Hole pattern Hex socket cap screw A B D1 D6 E1 E2 H H1 H2 N S S1 T1 S2 T2 Clamping length d0 x P x Dw ISO 4762 H7 L kg mm mm mm mm mm mm mm mm mm mm 16 x 5R/L x 3 16 x 10R x 3 16 x 16R x 3 0.91 BB2 M8 50 35 mm ±0.01 28 38 50 mm ±0.1 20 mm ±0.1 24 mm ±0.01 48 10 20 8.4 M10 15 M5 10 37 20 x 5R/L x 3 20 x 10R x 3 20 x 20R x 3,5 1.18 55 37.5 mm ±0.01 36 47 55 mm ±0.1 23 mm ±0.1 28 mm ±0.01 56 22 M6 11 45 25 x 5R/L x 3 25 x 10R x 3 25 x 25R x 3,5 1.33 40 mm ±0.01 40 51 60 mm ±0.1 30 mm ±0.01 60 49 32 x 5R/L x 3,5 32 x 10R x 3,969 32 x 20R x 3,969 32 x 32R x 3,969 2.27 M12 70 50 mm ±0.01 50 65 75 mm ±0.1 30 mm ±0.1 35 mm ±0.01 70 27 13 M16 20 M8 14 52 40 x 5R/L x 3,5 40 x 10R/L x 6 40 x 12R x 6 40 x 16R x 6 40 x 20R x 6 40 x 25R x 6 40 x 30R x 6 40 x 40R x 6 3.61 BB1 M14 80 60 mm ±0.01 63 78 90 mm ±0.1 35 mm ±0.1 42 mm ±0.01 84 12 31 15 M18 25 17 65.5 50 x 5R x 3,5 50 x 10R x 6 50 x 12R x 6 50 x 16R x 6 50 x 20R x 6,5 50 x 25R x 6,5 50 x 30R x 6,5 50 x 40R x 6,5 5.63 M16 95 70 mm ±0.01 75 93 110 mm ±0.15 45 mm ±0.15 48 mm ±0.01 96 34 17 M20 30 M10 75 63 x 10R x 6 6.72 100 75 mm ±0.01 90 108 120 mm ±0.2 46 mm ±0.15 55 mm ±0.01 110 15 37 20 89 63 x 20R x 6,5 63 x 40R x 6,5 7.67 80 mm ±0.01 95 115 130 mm ±0.2 58 mm ±0.01 116 M12 95 80 x 10R x 6,5 8.6 85 mm ±0.01 105 125 140 mm ±0.2 63 mm ±0.01 126 105 80 x 20R x 12,7 10.53 95 mm ±0.01 125 145 160 mm ±0.2 73 mm ±0.01 146 22 125 80 x 40R x 12,7 Legend Symbol Description d0 Nominal diameter P Lead DW Ball diameter Project planning information Attention: If a ball screw assembly with a front lube unit is used, the front lube unit may project beyond the housing. This must be considered when calculating the stroke. Mounting In addition to bolting, the housings should be locked in place by positive means (for example, two pins with a diameter equal to that of the screws). We recommend using screws with a strength class of 8.8. Tightening torque See “Installation” section “Installation in the machine” Reference edges are formed on both sides. Safety Instructions Required and supplementary documentation For further instructions and information, please refer to the documentation for this product. You can find PDF files of these documents on the Internet at www.boschrexroth.com/mediadirectory. We would also be happy to send you the documents that you want. If you are unsure about using this product, please contact Bosch Rexroth. Ordering codes Material numbers Size Part number CAD data Buy d0 x P x Dw 16 x 5R/L x 3 16 x 10R x 3 16 x 16R x 3 R150600050 20 x 5R/L x 3 20 x 10R x 3 20 x 20R x 3,5 R150610050 25 x 5R/L x 3 25 x 10R x 3 25 x 25R x 3,5 R150620050 32 x 5R/L x 3,5 32 x 10R x 3,969 32 x 20R x 3,969 32 x 32R x 3,969 R150630050 40 x 5R/L x 3,5 40 x 10R/L x 6 40 x 12R x 6 40 x 16R x 6 40 x 20R x 6 40 x 25R x 6 40 x 30R x 6 40 x 40R x 6 R150640050 50 x 5R x 3,5 50 x 10R