Корпус гайки MGS

Description Steel nut housings MGS are designed for FEM-E-S, FDM-E-S, FEP-E-S and SEM-E-S nuts. Dimensions 1) for size 16x5/16x10 Technical data and dimensions Size Mass Hole pattern Hex socket cap screw A B D1 D6 E1 E2 H H1 H2 N S S1 T1 S2 T2 Clamping length d0 x P x Dw FEM-E-S/FDM-E-S/FEP-E-S SEM-E-S ISO 4762 H7 L kg mm mm mm mm mm mm mm mm mm mm 16x5R/L x 3 16x10R x 3 0.85 BB3 BB7 M8 40 35 mm ±0.01 28 40 52 mm ±0.1 20 mm ±0.1 28 mm ±0.01 55 10 10 8.4 M10 15 M6 10 44 16x16R x 3 20x5R/L x 3 20x10R x 3 1.05 BB4 37.5 mm ±0.01 33 45 56 mm ±0.1 32 mm ±0.01 62 51 20x20R x 3,5 20x40R x 3,5 25x5R/L x 3 25x10R x 3 1.178 42.5 mm ±0.01 38 50 63 mm ±0.1 34 mm ±0.01 65 54 25x25R x 3,5 32x5R/L x 3,5 32x10R x 3,969 1.746 M10 50 47.5 mm ±0.01 48 60 72 mm ±0.1 26 mm ±0.1 38 mm ±0.01 75 12 10.5 M12 61 32x20R x 3,969 32x32R x 3,969 32x64R x 3,969 40x5R/L x 3,5 2.367 M12 60 52.5 mm ±0.01 56 68 82 mm ±0.1 30 mm ±0.1 42 mm ±0.01 82 12 15 13 M16 20 12 64 40x10R/L x 6 40x20R x 6 3.587 M14 65 60 mm ±0.01 63 78 93 mm ±0.1 35 mm ±0.1 50 mm ±0.01 98 15 M18 25 M8 14 79.5 40x40R x 6 50x10R x 6 50x16R x 6 6.187 M16 80 70 mm ±0.01 72 90 108 mm ±0.15 46 mm ±0.15 58 mm ±0.01 113 17 17 M20 30 M10 18 92 50x5R x 3,5 4 M14 65 65 mm ±0.01 68 82 100 mm ±0.15 35 mm ±0.15 52 mm ±0.01 101 15 15 M18 M8 14 82.5 50x20R x 6,5 50x40R x 6,5 63x10R x 6 7.173 M16 80 75 mm ±0.01 85 105 121 mm ±0.15 46 mm ±0.15 65 mm ±0.01 128 15 17 17 M20 M10 18 107 80x10R x 6,5 9.334 85 mm ±0.01 105 125 140 mm ±0.2 78 mm ±0.01 153 M12 20 132 Legend Symbol Description d0 Nominal diameter P Lead DW Ball diameter Project planning information Attention: If a ball screw assembly with a front lube unit is used, the front lube unit may project beyond the housing. This must be considered when calculating the stroke. Mounting In addition to bolting, the housings should be locked in place by positive means (for example, two pins with a diameter equal to that of the screws S2). We recommend using screws with a strength class of 8.8. Tightening torque see general technical notes and information, “Installation” Reference edges are formed on both sides. Safety Instructions Required and supplementary documentation For further instructions and information, please refer to the documentation for this product. You can find PDF files of these documents on the Internet at www.boschrexroth.com/mediadirectory. If you are unsure about using this product, please contact Bosch Rexroth. Ordering codes Material numbers Size Part number CAD data Buy d0 x P x Dw 16x5R/L x 3 16x10R x 3 R150600020 16x16R x 3 20x5R/L x 3 20x10R x 3 R150610020 20x20R x 3,5 20x40R x 3,5 25x5R/L x 3 25x10R x 3 R150620020 25x25R x 3,5 32x5R/L x 3,5 32x10R x 3,969 R150630020 32x20R x 3,969 32x32R x 3,969 32x64R x 3,969 40x5R/L x 3,5 R150640020 40x10R/L x 6 40x20R x 6 R150640021 40x40R x 6 50x10R x 6 50x16R x 6 R150650021 50x5R x 3,5 R150650020 50x20R x 6,5 50x40R x 6,5 63x10R x 6 R150660020 80x10R x 6,5 R150670020 Legend Symbol Description d0 Nominal diameter P Lea