Фланцевая одинарная гайка FED-E-B

Description Connection dimensions similar to DIN 69051, Part 5 flange type B Nut for significantly increasing the dynamic and static load capacity With seals Preload class: C0, C00, C1, C2 Tolerance grade: T3 (for sizes as per the product overview for screws, see general technical notes and information, “Product description”), T5, T7, T9 Product description Product overview Technical data Technical data for nuts Size C C0 vmax Mass d0 x P x Dw - i N N m/min kg 16 x 16 R x 3 - 6 17800 1) 24200 1) 96 2) 0.27 20 x 20 R x 3,5 - 6 25700 1) 38100 1) 120 2) 0.48 25 x 25 R x 3,5 - 6 28500 1) 47100 1) 150 2) 0.63 32 x 20 R x 3,969 - 6 38300 1) 67300 1) 94 2) 0.91 32 x 32 R x 3,969 - 6 37900 1) 68000 1) 150 2) 1.25 40 x 20 R x 6 - 8 95500 1) 171100 1) 75 2) 1.85 40 x 25 R x 6 - 8 91400 1) 171700 1) 93 2) 1.88 40 x 30 R x 6 - 8 90400 1) 170300 1) 112 2) 2.13 40 x 40 R x 6 - 6 71500 1) 124500 1) 150 2) 2.35 50 x 20 R x 6,5 - 8 116500 1) 240000 1) 60 2) 2.5 50 x 25 R x 6,5 - 6 92600 1) 175100 1) 75 2) 2.45 50 x 30 R x 6,5 - 8 114500 1) 237700 1) 90 2) 3.04 50 x 40 R x 6,5 - 6 89300 1) 171500 1) 120 2) 3.4 63 x 20 R x 6,5 - 8 130800 1) 292000 1) 48 2) 3.9 63 x 40 R x 6,5 - 6 100000 1) 230600 1) 95 2) 5.05 1) The load ratings are valid for tolerance grades T3 and T5 only. For other tolerance grades, please take into account the correction factor fac (see General Technical Notes and Information "Technical Data", Technical Notes). 2) See "characteristic speed d0 • n" (see General Technical Notes and Information "Technical Data" (Technical Notes), and "Critical Speed ncr" (see General Technical Notes and Information, "Project planning notes") Operating conditions Size Admissible operating temperature (min ... max) 1) Admissible storage temperature (min ... max) d0 x P x Dw - i 16 x 16 R x 3 - 6 -10 °C ... +80 °C -15 °C ... +80 °C 20 x 20 R x 3,5 - 6 25 x 25 R x 3,5 - 6 32 x 20 R x 3,969 - 6 32 x 32 R x 3,969 - 6 40 x 20 R x 6 - 8 40 x 25 R x 6 - 8 40 x 30 R x 6 - 8 40 x 40 R x 6 - 6 50 x 20 R x 6,5 - 8 50 x 25 R x 6,5 - 6 50 x 30 R x 6,5 - 8 50 x 40 R x 6,5 - 6 63 x 20 R x 6,5 - 8 63 x 40 R x 6,5 - 6 1) Ball screw assemblies are suitable for continuous operation at temperatures up to 80 °C with temporary peaks of 100 °C (measurements taken on the outer shell of the nut). Legend Symbol Description Unit d0 Nominal diameter P Lead (R = right-hand) Dw Ball diameter i Number of ball track turns C Dynamic load capacity N C0 Static load capacity N Fmax Maximum static load kN vmax Maximum permissible speed m/min Technical notes Dimensions 1) Lube port at flange center (lube port machining: Flat surface L3 ≤ 15 mm, countersink L3 > 15 mm) 2) Nut rework: Axial lube port Dimensions Size d1 d2 D1 D5 Hole pattern D6 D7 L L3 L4 L5 L10 L14 S Sx d0 x P x Dw - i g6 mm mm mm mm mm mm mm mm mm mm mm mm mm mm 16 x 16 R x 3 - 6 15 12.9 28 48 BB2 38 5.5 61 12 20 6 43 40 M6 4 20 x 20 R x 3,5 - 6 19 16.7 36 58 47 6.6 77 25 8 57 44 25 x 25 R x 3,5 - 6 24 21.4 40 62 51 95 30 9 74 48 32 x 2