Description With standard seals Preload class: C0, C2 For precision screws PSR in tolerance grade T5, T7, T9 (with backlash only) Product description Product overview Technical data Operating conditions Size Admissible operating temperature (min ... max) 1) Admissible storage temperature (min ... max) d0 x P 20 x 5R -10 °C ... +60 °C -15 °C ... +80 °C 20 x 5R 25 x 5R 25 x 10R 30 x 5R 30 x 10R 39 x 5R 39 x 10R 48 x 5R 48 x 10R 60 x 10R 60 x 20R 75 x 10R 75 x 20R 1) Standard design PLSAs allow a continuous temperature of 60 °C (measured on the outershell of the nut). Technical data for nuts Size C C0 vmax Mass d0 x P kN kN m/min kg 20 x 5R 55 1) 80 1) 37.5 2) 0.65 20 x 5R 0.75 25 x 5R 65 1) 122 1) 30 2) 25 x 10R 74 1) 118 1) 60 2) 30 x 5R 87 1) 178 1) 25 2) 2.1 30 x 10R 101 1) 174 1) 50 2) 39 x 5R 123 1) 269 1) 19.2 2) 3.7 39 x 10R 145 1) 271 1) 38.4 2) 48 x 5R 188 1) 481 1) 15.6 2) 7.6 48 x 10R 220 1) 475 1) 31.2 2) 60 x 10R 322 1) 780 1) 25 2) 11.3 60 x 20R 375 1) 786 1) 50 2) 75 x 10R 480 1) 1487 1) 20 2) 19.4 75 x 20R 544 1) 1496 1) 40 2) 20.2 1) The load ratings are valid for tolerance grade T5 only. For other tolerance grades, please take into account the correction factor fac (see general technical notes and information, “Technical Data”, (technical notes). 2) See “Characteristic speed” (see general technical notes and information, “Technical Data”, (technical notes), and “Critical speed ncr” (see general technical notes and information, “Project planning notes”) Legend Symbol Description Unit d0 Nominal diameter mm P Lead (R = right-hand) C Dynamic load capacity kN C0 Static load capacity kN vmax Maximum speed m/min Technical notes Dimensions Dimensions Size D1 D5 Hole pattern D6 D7 L L3 L4 L5 S d0 x P mm mm mm mm mm mm mm mm 20 x 5R 42 64 mm BB1 53 5.5 65 20 22.5 11 M6 20 x 5R 45 68 mm 56 64 18 23 25 x 5R 56 84 mm 70 6.6 78 20 29 15 25 x 10R 84 cm 30 x 5R 64 98 mm 81 9 85 27 13 30 x 10R 39 x 5R 80 124 mm 102 11 100 33 33.5 15.5 39 x 10R 48 x 5R 105 150 mm 127 13.5 127 37 45 25 M8 x 1 48 x 10R 60 x 10R 122 180 mm 150 17.5 152 45 53.5 27 60 x 20R 75 x 10R 150 210 mm BB2 180 191 73 42 75 x 20R Legend Symbol Description d0 Nominal diameter P Lead (R = right-hand) Project planning information Calculation Mounting Installation Maintenance Lubrication Certification Directives and standards Delivery notes Delivered only as a complete unit Safety Instructions Required and supplementary documentation For further instructions and information, please refer to the documentation for this product. You can find PDF files of these documents on the Internet at www.boschrexroth.com/mediadirectory. We would also be happy to send you the documents that you want. If you are unsure about using this product, please contact Bosch Rexroth. Notes Ordering codes Ordering data: PLSA 20 x 5R FEM-E-S 00 4 0 T5 R 812Z150 412Z120 1100 1 1 Material numbers Size Part number Buy d0 x P 20 x 5R R157CA1001 20 x 5R R157CA1011 25 x 5R R157C21001 25 x 10R R157C23001 30 x 5R R157C
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
