Распределительный Золотник клапаны, прямого действия, с fluidic приводом WP 6...XC

Description Size 6 Component series 6X Maximum operating pressure 315 bar Maximum flow 60 l/min Area of application in accordance with the Explosion Protection Directive 2014/34/EU: I M2, II 2G, II 2D, II 3G, II 3D Type of protection of the valve solenoids: c (EN 13463-5) Features 4/3-, 4/2- or 3/2-way version Porting pattern according to ISO 4401-03-02-0-05 (with or without locating hole) Operating methods: pneumatic Product description Valves of type WP 6...XC are fluidically operated directional spool valves. They control start, stop and direction of flow. The directional valves basically consist of housing (1), an actuation element (2) (pneumatic actuation cylinder), the control spool (3) and one or two return springs (4). The connections for the control are arranged radially (5). The bleeding ports (6) must be connected and led to a place outside the potentially explosive area. In the de-energized condition, the control spool (3) is held in the central or initial position by the return springs (4) (except for impulse spools). The control spool (3) is moved to the desired spool position by means of the operating methods. Type 4WP 6 E6X/...XC/... Without spring return, with detent, version ..OF/.. Directional valves with pneumatic operation are also available as 2-spool position valve with detent (7). If actuation elements with detent are used, each spool position can be fixed. Without spring return, version ..O/.. If actuation elements without return springs and without detent are used, there is no defined spool position in the non-operated condition. Type 4WP 6 C6X/OF/N...XC/... Throttle insert (version "B..") The use of a throttle insert is required when due to prevailing operating conditions, flows can occur during the switching processes, which exceed the performance limit of the valve. Type code 01 02 03 04 05 06 07 08 09 10 11 12 13 W P no code 6 6X / XC / 01 3 main ports 3 4 main ports 4 02 Directional valve W Type of actuation 03 pneumatic P 04 Ports radial no code 05 Size 6 6 06 Symbols e.g. C, E, EA, EB, etc; possible version, see chapter "Symbols/Circuit diagrams" 07 Component series 60 … 69 (60 … 69: unchanged installation and connection dimensions) 6X Control spool return 08 With spring return no code Without spring return O Without spring return with detent OF 09 Without manual override no code With manual override N Explosion protection 10 Valves in explosion-protected design; for details, see "Information on explosion protection", in chapter "Technical data" XC 11 Without throttle insert no code Throttle Ø 0.8 mm B08 1) Throttle Ø 1.0 mm B10 1) Throttle Ø 1.2 mm B12 1) Seal material 12 NBR seals no code FKM seals V Observe compatibility of seals with hydraulic fluid used. 13 Without locating hole no code With locating hole / 60 2) With locating hole and locking pin ISO 8752-3x8-St / 62 1) Use if volume flow > performance limit of the valve, effective in channel P. 2) Locking pin ISO 8752-3x8-St, material no. R900005694 (separa