Description Size 10 Component series 1X Max. operating pressure 315 bar Flow, max. 120 l/min Features Pilot-operated valves with position feedback and integrated electronics for system pressure limitation (pilot oil only internally) Adjustable via the position of the solenoid armature in relation to the compression spring Position-controlled, minimum hysteresis Maximum pressure limitation, even with defective electronics For subplate mounting: porting pattern according to ISO 5781-AG-06-2-A Product description Proportional pressure reducing valves of type DREBE10Z are pilot-operated pressure reducing valves and are used for system pressure limitation. They are actuated by a position-controlled proportional solenoid with integrated electronics. A logic element (spool valve) is located in the valve housing in the “normally open” version, pilot-operated in poppet seat version. Type code 01 02 03 04 05 06 07 08 09 10 11 12 13 DREB E 10 Z – 1X / XY M G24 K31 A1 M * 01 Proportional pressure reducing valve with inductive position transducer at the poppet DREB 02 With integrated electronics (OBE) E 03 Size 10 04 Porting pattern according to ISO 5781-AG-06-2-A Z 05 Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions) 1X Maximum pressure rating 06 Up to 180 bar 180 Up to 315 bar 315 07 Bleed port X, pilot oil port Y XY 08 Without check valve M Supply voltage of the control electronics 09 Direct voltage 24 V G24 Electrical connection 10 Connector according to DIN 43563-AM6 Mating connector separate order K31 Electrical interface 11 Command value 0 … 10 V A1 12 NBR seals, suitable for mineral oil HL and HLP according to DIN 51524 M 13 Further details in the plain text * Technical data general Type DREBE10Z Size 10 Component series 1X Installation position any Weight kg 7.8 Ambient temperature range °C -20 … +50 hydraulic Type DREBE10Z Size 10 Maximum operating pressure bar 315 Maximum operating pressure Anschluss A bar 315 Port B bar 315 Port X 1) bar 315 Pilot flow l/min ≤ 0.8 Maximum flow 2) l/min 120 Hydraulic fluid temperature range °C -20 … +70 Viscosity range mm²/s 10 … 800 Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 3) Class 18/16/13 according to ISO 4406 (c) Hysteresis % ≤ 1 Manufacturing tolerance of the command value pressure characteristic curve 2) % 1) Bleed port 2) See characteristic curves 3) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. electrical Type DREBE10Z Power supply Nominal voltage V 24 Lower limit value V 21 Upper limit value V 40 Duty cycle % 100 Protection class according to DIN EN 60529 IP65 Conformity CE conformity according to EMC directive 2004/108/EC tested according to EN 61000-6-2 and EN 61000-6-3 Downloads Propor
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
