Description Extension cable M17 -> M17 Technical data Data for encoder cables REG0011 RoHS compliant with EU directive 2002/95/EC AWM Style (UL) 20233 Diameter, cable 10 mm ±0.3 Cable sheath material PUR Cable sheath color RAL 2003 (orange) Specific cable weight 0.027 kg/m Oil resistance EN 60811-2-1 and EN 50363-10-2 Burning behavior UL 758, section 40, Cable Flame Test Section 1061 as per UL 1581 and CSA C22.2 No. 210-05 Sec. 8.8.2. Test according to DIN EN 60332-1-2 Bending cycles 5 million Bending radius for flexing installation 75 mm Bending radius for fixed installation 40 mm For more information on connectors and cables, see the documentation "Rexroth connection cable IndraDrive and IndraDyn" DOK-CONNEC-CABLE*INDRV-CA03-DE-P, R911322948 de-DE, 24.04.2013. Cable for DRIVE-CLiQ For IMS with the interface option "DQ" (DRIVE-CLiQ), we recommend MOTION-CONNECT DRIVE-CLiQ-lines with M12-connector for direct measuring systems from the Siemens accessories range. Cable for FANUC αi For IMS with the interface option “FN” (FANUC) we recommend the FANUC cable: LX660-4077-T321 Dimensions Other cable lengths on request For further technical data/cable description see the IMS R320103262 instructions Cable lengths Part number Length m R911344382 0.5 R911342692 2 R911341134 3 R911342693 5 R911342694 8 R911369771 10 R911341135 15 R911341136 20 Information Maximum cable length IMS-I For connection to Rexroth drive controller IndraDrive: Encoder interface EC (12 VDC supply): maximum length is 75 m Encoder interface EN2 interface (5 VDC supply): maximum length is 50 m For connection to other evaluation electronics: Signal type I1 (1 Vpp, current consumption 300 mA): Voltage drop over 75 m cable length is 2.05 V, i.e., the encoder supply voltage for the evaluation electronics must be able to be set to at least 6.8 V (for example, by sense-control). Signal type I2, I3, I4 (TTL, current consumption 350 mA): Voltage drop over 75 m cable length is 2.30 V, that is, the encoder supply voltage for the evaluation electronics must be able to be set to at least 7.05 V (for example, by sense-control). Maximal cable length for IMS-A Interfaces Length (m) Clock rate (MHz) HF 75 - SSI 10 2 48 1 74 0,75 DQ in accordance with Siemens specification FN 48m (when using the FANUC cable LX660-4077-T321) Please note that the cable length can additionally be limited by: Plug-and-socket connections (> two pieces) EMC behavior Be sure to take note of the information in the project planning instructions for IndraDrive drive control units and the EMC project planning. The overall length of the pre-assembled cables is measured inclusive of the connectors. Ordering codes Part number Length Buy R911344382 0.5 m R911342692 2 m R911341134 3 m R911342693 5 m R911342694 8 m R911369771 10 m R911341135 15 m R911341136 20 m Downloads Integrated Measuring System IMS for Ball and Roller Rail systems / Instructions for electrical interfaces / only PDF Manual | R320103166_EN | 2017-10-01 | English | P
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
