Description For tensile and compressive forces Corrosion-resistant stainless steel version Integrated amplifier Low temperature coefficient High long term stability Features High shock and vibration resistance For dynamic or static measurements Good reproducibility Easy mounting Product description 1) Load measuring pin 2) Clevis mount with force measuring bolts If your application requires precise load sensing, there is a clevis bearing block version with force measuring bolt available for this purpose. This option can be selected on the end of the piston rod as well as on the timing belt side drive. Thanks to the thin-film technology used, the load cells are very robust and stable over the long term. The load cells are compliant with the EN 61326 standard for electromagnetic compatibility (EMC) and are designed to sense both tensile and compressive forces. Technical data Metrological specifications EMC 32 40 50 63 80 100 100XC Measuring range kN 1.3 5 8 16 22 45 56 Measurement inaccuracy kN ± 07 ± 0.025 ± 0.04 ± 0.08 ± 0.11 ± 0.23 ± 0.28 Protection type IP65 Hardness (load sensing range) 38 HRC Operating load (of the measuring range) % 150 Breaking load (of the measuring range) % 300 Non-linearity (of the measuring range) % ± 0.5 Repeatability (of the measuring range) % ± 0.25 Hysteresis (of the measuring range) % ± 0.2 Temperature drift zero point (of the measuring range per Kelvin) % ± 0.05 Temperature drift above measuring range (of the measuring range per Kelvin) % ± 0.05 Compensated temperature (min ... max) +10 °C ... +40 °C Operating temperature (min ... max) -20 °C ... +60 °C Electrical specifications Output signal (0kN) 0 V ±0.03 Output signal (measuring range) -10 ... +10 V ±0.2 Power supply 24 V ±2 Current consumption 25 mA (24 V) Bandwidth 2.5 kHz ±0.2 Tare (zero setting function) (min ... max) 7.2 ... 24 V Connection Plug M12x1 Output signal 4 – 20 mA, reduced measurement range and test certificate on request. Technische Daten Anschlusskabel Length m 5 Rated voltage V 250 Rated current A 4 Plug outlet Angled 1. connection type Female connector, M12, 4-pin 2. connection type Flying leads Type of cable PUR black, shielded Suitable for flexing installation yes Cable cross-section mm2 4x0,34 Cable diameter D 5.9 mm ±0.2 Bending radius, stationary >10 x D Bending radius, flexing >5 x D Bending cycles > 2 million Ambient temperature, fixed (min ... max) -25 °C ... +80 °C Ambient temperature, in motion (min ... max) -40 °C ... +80 °C Connection cable included in delivery Electrical connection Connection diagram Connection diagram for load measuring pin Force measuring bolt 1 Supply (+) 2 Tare 3 GND 4 Output 5 Internal allocation Connection cable 1 brn = brown, power supply (+) 2 wht = white, tare 3 blu = blue, GND 4 blk = black, output Output signal depending on load direction Dimensions Dimensions EMC 32 40 50 63 80 100 100XC ⌀a f8 mm 10 12 16 20 35 b mm 83 89 99 107 109 119 170 c mm 43.5 49.5 58 66 67.5 77.5 124.5 d mm 35 ⌀e mm 28 35 Mo
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
