Description Size 10 Component series 5X Maximum operating pressure 210 bar Maximum flow 80 l/min Features Sandwich plate valve Porting pattern according to ISO 4401-05-04-0-05 4 pressure ratings 4 optional adjustment types: • Rotary knob • Sleeve with hexagon and protective cap • Lockable rotary knob with scale • Rotary knob with scale Check valve, optional (version "A") Pressure reduction in channel A, B or channel P Corrosion-protected design Product description The valve type ZDR is a direct operated pressure reducing valve in sandwich plate design with pressure limitation of the secondary circuit. It is used to reduce the system pressure. The pressure reducing valve basically comprises housing (1), control spool (2), compression spring (3), adjustment type (4) and an optional check valve. The secondary pressure is set via the adjustment type (4). Version “A” The valve is open in initial position. Hydraulic fluid can flow from channel A➀ to channel A➁ without restrictions. The pressure in channel A➁ is simultaneously applied via the control line (5) at the piston area opposite the compression spring (3). If the pressure in channel A➁ exceeds the value set at the compression spring (3), the control spool (2) is pushed against the compression spring (3) to control position and keeps the set pressure in channel A➁ at a constant level. Control signal and pilot oil are supplied internally via the control line (5) from channel A➁. If the pressure in channel A➁ increases further due to an external force effect at the actuator, it pushes the control spool (2) even further against the compression spring (3). In this way, channel A➁ is connected to the tank (channel TB) via the control edge (6) at the control spool (2) and the housing (1). So much hydraulic fluid is discharged into the tank, that the pressure does not increase any further. The leakage oil drain from the spring chamber (7) is always effected externally via channel TA. A pressure gauge connection (8) allows for the control of the secondary pressure at the valve. A check valve can be used for free flow back from channel A➁ to A➀ with version “A”. Versions “P” and “B” For version “P”, the pressure reduction is effected in channel P➀. Control signal and pilot oil are supplied internally from channel P➀. For version “B”, the pressure is reduced in channel P➀; but the pilot oil is extracted from channel B. If the directional valve is in spool position P to A, the pressure in channel B may not exceed the set secondary pressure. Otherwise, there is pressure reduction in channel A. Notice: If used without directional valve, channels TA and TB are connected to each other (e.g. in the cover plate). During set-up of a directional seat valve NG 10, a sandwich plate type HSZ10A078-3X/M00 (material no. R900537264) has to be used. Type ZDR 10 DA … ① component side ② plate side Type code 01 02 03 04 05 06 07 08 09 10 11 12 13 Z DR 10 D - 5X / Y * 01 Sandwich plate valve Z 02 Pressure reducing valve DR 03
Бесплатная доставка по РФ при заказе от 50 000 р.
Компания ООО «Индатэк» работает с юридическими лицами по всей территории России. Каждый день мы осуществляем доставку заказов от Калининграда до Владивостока. Вместе с отгруженным товаром, клиент получает бухгалтерские и гарантийные документы на 12 месяцев. По желанию, вы можете продлить срок гарантии.
